Zithini iimfuno zokwenza iplanga zensimbi ye-scale?

Iplanga ye-scaftical scalFold isetyenziswe ngokubanzi kwiinkqubo ze-scafFoddes kunye neenkqubo zokwakha iinkqubo zokuxhasa izixhobo zokwakha kunye nabasebenzi bokwakha.

 

Sikwabiza iplanga yensimbi ye-ScacheFolffs Scaches zensimbi, iibhodi zensimbi, iiplanga ze-Cawalfok, njl.

 

Iplanga ye-scafnimoldit scalfolding scael ineengenelo zokunganyangwa komlilo, ukuqokelelwa kwesanti, isibane, amandla aphezulu, amandla aphezulu, kunye nezinye izinto.
Iimfuneko ze-Galvanity Scal Fees

 

Iplanga ye-Scanicle i-scaffoldang scael idlala indima ebalulekileyo kwimizi-mveliso yokwakha, ngoko ke umgangatho wabo kufuneka ulawulwe ngokungqongqo ngexesha lenkqubo.

 

Umphezulu weBhodi ye-ScafFold Chowe kufuneka ibethe tyaba, kwaye ishedyuli ayifanelanga i-5.0mm. I-Groogle-ene-Groogle-ene-Grootele enozinzo olungcono ikhethiwe kumphezulu webhodi, ocwangcisiweyo ngakumbi kune-Dip-dip ye-Dip-distanidal Groupove Groupove Groove. Kunganyangeki ukucinezelwa kunye nokuzinza.

 

Beka iplanga yentsimbi kwindiza esemgangathweni, iimfama ezingaboniyo zeekona ezine zeBhodi ziyabini, kwaye akufuneki zibe ngaphezulu kwe-5.0mm.

 

I-RARRS kumda wamaqonga ensimbi kufuneka icocwe.

 

Umva webhodi yensimbi ye-scalfolds ifakwe kwi-stroffening rifting rib yonke i-500 ~ 700mm. Impazamo yomkhondo we-stiffener ye-stiffener ye-STEEL yeebhulukhwe zensimbi akufuneki idlule kwi-0.5mm, kunye nempazamo yokuphela kwetekisi akufuneki idlule kwi-2.0mm.

 

Ii-wels zeplanga zensimbi ze-scal akufuneki zingabi ngaphantsi kwe-2.0mm, kwaye ububanzi bee-wels akufuneki bube ngaphantsi kwe-2.0mm. Ubude bomthungo ngamnye oqhubekayo we-welding we-tiffener akufuneki ungabi ngaphantsi kwe-10mm, kwaye ithambo le-welding lingabi ngaphantsi kwe-10. Ubude be-wilding joent yi-≥15mm, i-welding dibanela ≥6, kunye ne-welding Seam Seam Seam yi-≥2mm. I-welding yentloko yokuphela kwentloko kufuneka ibe ngaphezulu kwe-7 ye-welding, ngakumbi i-welding eqinileyo kumacala omabini, kwaye ukuphakama kwe-Welding Seam yi-3mm njengemfuneko yobugcisa.

 

Umphezulu webhodi ye-SEE yentsimbi kufuneka ikhukulise kwaye iphinde ixhaswe, emva koko iphinde iphinde iphinde. Kucelwa ukuba uqhubekise iprimer kanye kwaye i-topcoat kanye, kwaye ubukhulu befilimu nganye yepeyinti akufuneki bube ngaphantsi kwe-25μm.

 

I-batch nganye yephepha elishushu le-DAIP enokungena kumzi-mveliso kufuneka likhuphe ingxelo engaphantsi kwempahla okanye ingxelo yovavanyo ekhutshwe ngumbutho wokuvavanya.

 

Ukulungiselela iplanga yentsimbi ephezulu kakhulu, nceda ukhululeke ukunxibelelana nathi.


IXESHA LOKUQALA: UJan-26-2024

Sisebenzisa iicookies ukuba sinike amava okubrawuza, sihlalutya itrafikhi yendawo, kunye nequmrhu. Ngokusebenzisa le ndawo, uyavuma ukusebenzisa iicokies.

Yamkela