Yiziphi izidingo zamapulangwe ensimbi enziwe gaffing?

Ipulangwe lensimbi ye-galvanized scaffling lisetshenziswa kabanzi ezinhlelweni zama-scaffolting kanye nezinhlelo zamafomu zokusekela izinto zokwakha kanye nabasebenzi bezokwakha.

 

Siphinde sibize futhi amapulangwe ensimbi ama-scaffolding scaffolding steelwolding board board, amabhodi ensimbi, amapulangwe e-catwalk catwalk, njll.

 

Ipulangwe le-Scaffdolding Scafching lensimbi linezinzuzo zokumelana nomlilo, ukunqwabelana kwesihlabathi, ukungasindi, amandla aphezulu aphezulu, ukwakheka okubunjiwe okuphezulu ezinhlangothini zombili, nezinye izici.
Izidingo zamapulangwe ensimbi e-galvanized scaffolding

 

Amapulangwe ensimbi e-galvanized scaffolding adlala indima ebalulekile ezimbonini zokwakha, ngakho-ke ikhwalithi yabo kufanele ilawulwe ngokuqinile ngesikhathi senqubo yokukhiqiza.

 

Ingaphezulu lebhodi lensimbi elinama-scaffolting kumele libe lifulethi, futhi ukuvela kwe-deflection akufanele kudlule u-5.0mm. Unxantathu omiswe unxantathu ngokuqina okungcono ukhethwe ebusweni beBhodi, obuhlelwe kakhulu kune-trape yezizukulwane zesizukulwane sesithathu Kumelana kakhulu nokucindezela nokuqina.

 

Beka amapulangwe ensimbi endizeni evamile, amakhona ayimpumputhe emakhoneni amane ebhodi ayamangala, futhi akufanele adlule u-5.0mm.

 

Ama-burrs emaphethelweni amapulatifomu ensimbi kufanele ahlanzwe.

 

Umhlane wamabhodi ensimbi e-scaffolding ushumeki nge-rib evinjiwe ebekiwe njalo ngo-500 ~ 700mm. Iphutha lebanga le-stiffener lamabhodi ensimbi akufanele lidlule ku-0.5mm, futhi iphutha le-expplate aze lidlule ku-2.0mm.

 

Ama-welds amapulangwe ensimbi e-scaffolding akumele abe ngaphansi kwama-2.0mm, futhi ububanzi bama-welds akufanele bube ngaphansi kwama-2.0mm. Ubude bomthungo we-welding ngamunye oqhubekayo akufanele abe ngaphansi kwe-10mm, futhi umthungo we-welding akufanele ube ngaphansi kwe-10. Izimbambo ezilukhuni zikhethwe yi-Spot Welding. Ubude be-Welding Joint yi-≥15mm, ukuhlanganiswa kwe-welding kungu-≥6, futhi ukuphakama komthungo we-welding kuyinto ≥2mm. Ukushiswa kwekhanda le-endplate kufanele kube ngaphezu kwamaphoyinti we-welding angaphezu kwayi-7, ikakhulukazi ama-welding aqinisiwe ezinhlangothini zombili, futhi ukuphakama komthungo we-welding kuyinto engu-3mm njengesidingo sobuchwepheshe.

 

Ingaphezulu lebhodi lensimbi lensimbi kufanele lihlehlise futhi lidele, bese lizinikezela. Kuyadingeka ukusebenzisa i-primer kanye kanye ne-topcoat kanye, futhi ubukhulu befilimu ngalinye lokupenda akufanele kube ngaphansi kwama-25μM.

 

I-batch ngayinye yamashidi ensimbi eshisayo angena efektri kufanele akhiphe isitatimende sezinto ezibonakalayo noma isitatimende sokuhlola esikhishwe yinhlangano yokuhlola.

 

Okwekhwalithi ephezulu yensimbi yamapulangwe, sicela ukhululeke ukuxhumana nathi.


Isikhathi Seposi: Jan-26-26-2024

Sisebenzisa amakhukhi ukunikeza isipiliyoni esingcono sokuphequlula, sihlaziye ithrafikhi yesayithi, futhi wenze ngezifiso okuqukethwe. Ngokusebenzisa leli sayithi, uyavuma ukusetshenziswa kwethu kwamakhukhi.

Amukela