Ukugoqa

1. Izidingo zokusungulwa kwe-Support Rood Type Check Cantilevered Scaffolding
Ukwakhiwa kwe-Support Rod-Type Card-Type Cantilevered Scaffold kudinga ukulawula umthwalo, futhi ukwakheka kufanele kube ukuqina. Lapho kusungulwa ishelufu elingaphakathi, ukuze ibha yesiphambano liphume ngaphandle kodonga, bese kufakwa ibha elithambekele bese lixhumeka ngokuqinile nge-protruding cross bar, bese kubanjwa i-cantilevered board. Inetha lokuphepha lisethelwe ngezansi ukuze liqinisekise ukuphepha.
2. Ukusetha kwezingxenye zodonga
Ngokwesayizi we-axis wesakhiwo, setha eyodwa njalo nge-3 spans (6m) endaweni evundlile. Eqinisweni mpo, umuntu kufanele ahlelwe njalo ngamamitha ayi-3 kuye kwangama-4, futhi iphuzu ngalinye liyadingeka ukuba ligxishwe komunye nomunye ukwakha ilungiselelo eliqhakaza le-plum. Indlela yokuqalisa izingxenye zodonga iyafana neyophansi.
3. Ukulawulwa okuqondile
Lapho edabukisa, i-verticality of the scaffoldolding ehlukanisiwe kufanele ilawulwe ngokuqinile, kanye nokuphambuka kwe-verticable okuvunyelwe:
4. Scaffolding
Ungqimba olungaphansi lwebhodi le-scaffold kufanele limbozwe ngamabhodi amikhali aminyene, futhi izingqimba ezingenhla zingambozwa ngamabhodi okukhanya okukhanya okugcwele kugxishwe amapuleti ensimbi amancanyana.
I-5. Izikhungo Zokuvikelwa Kwezokuphepha
Ama-Guarderails namabhodi okuzwayo azonikezwa esitezi ngasinye se-scaffold.
Ingaphandle nangaphansi kwe-scaffold kuvaliwe nge-mesh sporty enetha, kanye nendima edingekayo phakathi kweshalofini nesakhiwo kufanele kugcinwe.
Ukuxhumana phakathi kwe-cantilever hlobo Scaffold Pole kanye nogongolo lomuntu we-cantilever (noma ugongolo lwe-longitudinal).

Ipayipi lensimbi elide elingu-150 ~ 200mm kufanele lifakwe emgodini we-cantilever (noma i-longitudinal beam), ububanzi bayo obungaphandle buyi-1.0 ~ 1.5mm incane ukwedlula ububanzi be-scaffold pole, futhi uxhumeke nabane-fasteners. Qiniseka ukuthi ishalofu lizinzile.
6. Ukuxhumeka phakathi kogongolo lwe-cantilever kanye nesakhiwo sodonga
Izingxenye zensimbi kufanele zingcwatshwe kusenesikhathi noma izimbobo kufanele zishiyelwe ukuqinisekisa ukuxhumana okuthembekile, futhi izimbobo akufanele zidonswe ukuze zilimaze udonga.
7. I-Diagonal Hlala Induku (Intambo)
I-Diagonal Tie Rod (Intambo) kufanele ifakwe idivaysi eqinisa ukuze induku yokubopha ibeke umthwalo ngemuva kokuqina.
8. I-Steel Bracket
Ukushiswa kwe-welding ye-stacket yensimbi kufanele kuqinisekiswe ukuphakama kwe-weld kanye nekhwalithi ehlangabezana nezidingo.