You should choose a solid ground for construction, and confirm whether the weather and surrounding power facilities will affect the construction. Make sure that all parts are intact and any defective parts should be replenished or replaced in time.
During construction, operators should have construction qualifications and properly wear protective equipment such as safety helmets, safety belts, and safety ropes. Warning signs should be set up around the construction site to prevent unauthorized persons from entering;
When building the first floor, if you are using locking casters, you should lock the casters in advance, use a spirit level as an aid, and adjust the nuts on the casters or soles to keep the scaffolding frame horizontal to prevent subsequent construction from causing the overall scaffolding to tilt;
When equipped with diagonal braces, they must be installed when the height of the diagonal braces can be installed. After each frame is installed, the locks should be fastened on the connecting pins. The construction process should be carried out strictly by the standard construction diagram. Do not Reduce accessories and when climbing, climb from the inside of the scaffolding;
When moving the scaffolding, all personnel on the scaffolding should evacuate and clean up all debris on the scaffolding and the ground. The operator should push the scaffolding at the bottom of the scaffolding. When stopping moving the scaffolding, all casters must be locked to prevent accidental sliding.
During use, you should be alert to all the environments around the construction site. When aluminum alloy mobile scaffolding is used at high altitudes, the wind factor plays a considerable role. In an appropriate wind environment, pay attention to the fact that you can work safely under protected conditions, and the wind When it is large and without effective fixed and stable protection, the wind factor becomes one of the most dangerous conditions for aluminum towers, and the wind factor must be considered and paid attention to.
When the wind speed is >7.7m per second, stop the tower; if the wind speed reaches 11.3m per second, tie the tower to the building; if it reaches 18m per second, the tower needs to be dismantled, and there must be no high pressure within the operating range Cables or other obstacles that affect the safety of high-altitude operations; tools and materials cannot be placed on the scaffolding platform pedals for a long time. When stopping use, warning signs should be made. When using plug-in tools on mobile scaffolding, grounding must be done. Use electric tools. When using tools, pay attention to the impact of horizontal forces on the scaffolding.
Post time: Mar-05-2024