The construction of floor-standing scaffolding starts directly from the ground or floor surface. Its bearing capacity is large and the shelf is stable and not easy to loosen and tilt. It can not only be used for structural engineering construction, but also decoration engineering construction; Construction operations such as waterproofing of basement exterior walls and outdoor backfilling can be carried out directly; however, the relative disadvantages are relatively obvious, requiring a large number of cantilever beams to be invested at one time, huge consumption of human and material resources, not economical, and long erection period, which will cause problems. cause some delays.
1) On the outer facade of the floor-standing scaffolding, the scaffolding poles and the ground (floor) surface should be laid with backing plates, the loose rock ground of the scaffolding foundation must be tamped and leveled, and the mortar must be solidified to keep the site clean and tidy;
2) The floor-mounted scaffolding should be organized for drainage, with drainage measures, and a grit chamber and a special person should be designated to be responsible for daily safety management;
3) The safety net around the floor-standing scaffold should be kept closed, and all personnel can only enter and exit through the safe passage. The safety net should be cleaned and inspected regularly to keep it clean, tidy, and clean; if any damage is found, the person in charge should be notified in time for replacement;
4) The flat bridge of the floor-standing scaffold should be covered with steel mesh as the scaffolding board to realize the effective and safe support of heavy objects and personnel, and the laying materials of the flat bridge should not use unsafe materials such as bamboo, bamboo chips, and wooden boards;
5) Ping bridges should be equipped with special personnel to conduct regular inspection, maintenance, and maintenance, and eliminate unstable safety hazards promptly. such as accumulation of waste;
Post time: Aug-24-2022