The components of the safety climbing ladder are vertical rods, cross rods and inclined rods. There is a row of pin warehouses at intervals of 50CM on the vertical poles. The pin warehouses are stamped from high-strength steel plates. , culverts, chimneys, water towers, dams and large-span scaffolding and other construction projects. The scaffold has high structural strength in three-dimensional space, good overall stability, and reliable self-locking function, which can effectively improve the overall stability and safety of the scaffold, and can better meet the needs of construction safety.
Safety ladders are scaffolding ladders that must be used to build high buildings. There are many precautions for safety ladders before erection. Before construction, foundation treatment should be carried out, a suitable working surface should be found, and the adjustable base should be placed on a suitable working surface. The use of scaffolding ladders is as follows:
1. The ladder is placed on the cross brace, which is used for the passage of construction personnel up and down.
2. The inclined rod is a component used to strengthen the entire frame. It is connected to the pin buckle of the pole by a special oblique joint.
3. Place a Z-shaped staircase with steps every 1.5 meters for the safety climbing ladder, and install the buckle wall every 4-5 meters, and the erection height is 100 meters.
4. The cross bar is the horizontal bearing member of the frame. It is connected with the vertical rod through the pin library. Because the pin library has wedge iron, the connection between the two has excellent mechanical strength and extremely high self-locking performance.
Post time: Jan-11-2022