1. A special construction plan for the support system should be designed in the early stage, and the general contractor should lay out the lines and position the support system horizontally and vertically to ensure the later setting of scissor braces and integral connecting rods to ensure its overall stability and resistance to overturning. sex;
2. The installation foundation of the buckle-type scaffolding must be compacted and leveled and concrete hardening measures must be taken;
3. The plate-and-buckle scaffolding should use the elevation range of the beams, slabs, and bottom plates at the same elevation. When using a single-component support frame with a large height and span, check the tension of the cross bars and the axial pressure (critical force) of the vertical bars to ensure The stability and safety of the frame;
4. After the erection of the frame is completed, sufficient scissor supports should be added, and sufficient horizontal tie rods should be added at a distance of 300-500mm between the top bracket and the frame crossbar to ensure that the overall stability is reliably guaranteed;
5. At present, the Ministry of Construction of my country has not issued industry standards and specifications for disc-type scaffolding (disc-type scaffolding), but it has begun to be widely used on construction sites. Of course, we hope that relevant departments will formulate corresponding specifications so that disc-type scaffolding can be used There is a reliable basis for correct use in engineering.
After the buckle-type scaffolding is erected, it has a beautiful appearance and has become a beautiful landscape in a city that has extremely strict requirements for civilized construction. It is in sharp contrast to the dirty bowl-button scaffolding.
Post time: Feb-19-2024