-
Acceptance requirements for common industrial scaffolding
1. Scaffold erection and dismantling personnel must pass the job operation ability training assessment before they can take up their posts with a certificate: 2. There should be corresponding safety facilities for the erection and dismantling of scaffolding, and operators should correctly wear sa...Read more -
Small details of safety acceptance of ground-type scaffolding
1. The inspection of steel pipes shall comply with the following provisions: ① There should be a product quality certificate; ② There should be a quality inspection report; ③ The surface of the steel pipe should be straight and smooth, and there should be no cracks, scars, delamination, misaligne...Read more -
Requirements for erecting industrial scaffolding
1. Before the scaffolding is constructed, a special construction plan should be prepared according to the actual situation of the building structure, and it should be implemented only after review and approval (expert review); 2. Before the installation and dismantling of the scaffolding, the saf...Read more -
Common problems of cantilever scaffolding
(1) Each vertical pole of the cantilever scaffolding should fall on the cantilever beam. Still, when encountering cast-in-place frame-shear structure, the cantilever beam layout is often not designed, resulting in some vertical poles in the corners or middle parts hanging in the air. (2) The comp...Read more -
Some requirements for disc-type scaffolding
First, material requirements 1. The vertical pole should not be lower than the provisions of Q345 in GB/T1591; the horizontal pole and horizontal diagonal pole should not be lower than the provisions of Q235 in GB/T700; the vertical diagonal pole should not be lower than the provisions of Q195 in...Read more -
Calculation of scaffolding and scaffolding accessories
1. The scaffolding design should ensure that the frame is a stable structural system and should have sufficient bearing capacity, rigidity, and overall stability. 2. The design and calculation content of the scaffolding should be determined based on factors such as the frame structure, erection l...Read more -
General requirements for cup-hook scaffolding
First, material requirements 1. Steel pipes should be ordinary steel pipes specified in the current national standard “Straight Seam Electric Welded Steel Pipe” GB/T13793 or “Welded Steel Pipe for Low-Pressure Fluid Transportation” GB/T3091, and their materials should comp...Read more -
The appearance quality of the components of the scaffolding shall comply with the following provisions
1. The steel pipe shall be straight and smooth, without defects such as cracks, rust, delamination, scarring, or burrs, and the vertical pole shall not use steel pipes with cross-section extension; 2. The surface of the casting shall be flat, without defects such as sand holes, shrinkage holes, c...Read more -
Details about the industrial steel pipe scaffolding
1. Steel pipe (vertical pole, sweeping pole, horizontal pole, scissor brace, and tossing pole): Steel pipes shall adopt Q235 ordinary steel pipes specified in the national standard GB/T13793 or GB/T3091, and the model shall be 48.3×3.6mm, with a wall thickness difference of 0.36mm. The maxim...Read more