-
Details of the scissor braces and transverse diagonal braces of the scaffolding
(1) The scissor braces should be set continuously from bottom to top from the bottom corner of the scaffold, and the surface of the scissor braces should be painted with red and white warning color paint. (2) The number of spanning poles for each scissor brace shall be determined as specified in ...Read more -
What are the precautions for scaffolding construction
1. During the construction of the scaffolding, it is necessary to check whether its fasteners are tightened to ensure that it is in a safe state during the erection process. The erection personnel must wear safety belts, safety helmets, safety ropes, and safety gloves. During the erection process...Read more -
3 important inspection points for aluminum alloy scaffolding
1. Circuit The easiest way to prevent any accident due to electric shock is to keep the structure away from the wires. If you can’t remove the power cord, turn it off. There should also be no tools or materials within 2 meters of the structure. 2. Wooden Board Even tiny cracks or cracks in ...Read more -
High-rise cantilevered scaffolding
1. High-rise scaffolding cantilevered from several layers: High-rise scaffolding can be cantilevered below 20m. In the case of cantilevering, construction generally starts from the fourth and fifth floors; when it exceeds 20m, it cannot be cantilevered upwards, because the cantilever is too high,...Read more -
Scaffolding pole foundation
(1) The height of floor-standing scaffolding should not exceed 35m. When the height is between 35 and 50m, unloading measures must be taken. When the height is greater than 50m, unloading measures must be taken and special plans must be taken. Make expert arguments. (2) The scaffolding foundation...Read more -
What are single-row scaffolding and double-row scaffolding
Single-row scaffolding: scaffolding with only one row of vertical poles, the other end of the horizontal flat pole rests on the wall structure. It is rarely used now and can only be used for temporary protection. Double-row scaffolding: It consists of two rows of vertical poles and horizontal pol...Read more -
Scaffolding Accessories
1. Scaffolding pipe Scaffolding steel pipes should be welded steel pipes with an outer diameter of 48mm and a wall thickness of 3.5mm, or welded steel pipes with an outer diameter of 51mm and a wall thickness of 3.1mm. The maximum length of steel pipes used for horizontal rods should not be great...Read more -
Scaffolding Design
1. Compared with the general structural design, the design of scaffolding has the following characteristics: (1) The load is highly variable; (the weight of construction personnel and materials changes at any time). (2) The joints connected by fasteners are semi-rigid, and the rigidity of the joi...Read more -
Installation requirements for fastener-type steel pipe scaffolding
1. During the erection of the steel pipe fastener scaffolding, attention should be paid to a flat and solid foundation, a base and a backing plate should be set, and reliable drainage measures should be taken to prevent water from soaking the foundation. 2. According to the setting of connecting ...Read more