News

  • Scaffold removal method

    The removal method and procedure are as follows: When removing the shelf, it should be carried out in the reverse order of erection, and it is not allowed to remove the tie rod first. Precautions when removing scaffolding: Mark the work area and prohibit pedestrians from entering. Strictly abide ...
    Read more
  • Scaffolding

    The erection method and procedure are as follows: The 3m-long cantilever rods are evenly arranged along the periphery of the floor surface at a distance of 1.6m, and each floor is connected with three rows of large horizontal bars (placed at the rear end of the cantilever rods and 0.5m away from ...
    Read more
  • Technical requirements for cantilevered scaffolding

    Cantilevered scaffolding is a highly dangerous sub-project, with a cantilever height greater than 20 meters. It is a dangerous project exceeding a certain scale, and the cantilever height should not exceed 20 meters. Technical requirements for cantilevered scaffolding: 1. The distance between the...
    Read more
  • FAQ about scaffolding

    Design (1) There should be a clear understanding of heavy-duty scaffolding. Generally, if the thickness of the floor slab exceeds 300mm, it should be considered to be designed according to heavy-duty scaffolding. If the scaffolding load exceeds 15KN/㎡, the design plan should organize expert demo...
    Read more
  • How to build aluminum alloy scaffolding

    The construction steps of aluminum alloy scaffolding are as follows: 1. Preparation: Check whether the scaffolding materials are intact, check whether the working area is flat and stable, and prepare necessary safety equipment and tools. 2. Install the foundation: Excavate the foundation at the f...
    Read more
  • Advantages of cantilevered scaffolding

    1. Cantilevered scaffolding has the advantages of local materials, convenient erection, cost saving, safety and reliability, and is currently widely used in high-rise building construction. At the same time, the facade effect of the outer frame is the business card of construction management, and...
    Read more
  • Acceptance of scaffolding

    The main points of scaffolding acceptance 1) Whether the setting and connection of the rods, the structure of the wall parts, supports, and door opening trusses meet the requirements. 2) Whether the foundation is waterlogged, whether the base is loose, whether the pole is suspended in the air, an...
    Read more
  • Construction process of cantilevered scaffolding

    1. Technical clarification, on-site construction preparation, setting-out positioning measurement; 2. Pre-embedded anchor ring in the cantilever layer; 3. Installation of the supporting system structure at the bottom of the cantilever frame; 4. Erect the pole and fasten the vertical sweeping pole...
    Read more
  • Scaffolding engineering safety production standardization

    1. The erection of scaffolding should meet the requirements of the standard specifications. A 200mm wide warning tape should be installed every 3 floors or 10m, fixed on the outside of the pole, and the scissors should be continuously installed. 2. Color: Paint the surface of the steel pipe of th...
    Read more


We use cookies to offer a better browsing experience, analyze site traffic, and personalize content. By using this site, you agree to our use of cookies.

Accept