The disc-type scaffolding has good safety. The disc-type scaffolding adopts self-locking connecting plates and latches. After the latch is inserted, it can be locked by its weight, and its horizontal and vertical diagonal rods make each unit a fixed triangular grid structure. The frame will not deform after being subjected to horizontal and vertical forces. The disc-type scaffolding is a complete system. The scaffolding board and ladder can play a role in ensuring the stability of the scaffolding and the safety of workers.
Therefore, compared with other scaffoldings, the hook pedal of the disc-type scaffolding has raised the safety of the scaffolding to a higher level. The disc-type scaffolding has been widely used and received rave reviews once it was promoted in the market because of its fast erection speed, firm connection, stable structure, safety, and reliability.
First, the operation process of the disc-type scaffolding
During the construction of the disc-type scaffolding, the specific operation process must be strictly followed in an orderly manner:
1. Site leveling and compaction; foundation bearing capacity test, material preparation;
2. Positioning and setting the usual pad and base;
3. Setting up the vertical poles, installing the longitudinal and transverse sweeping poles, and setting up the longitudinal and transverse crossbars;
4. Setting up the unloading wire rope;
5. Vertical poles, longitudinal and transverse crossbars, and external diagonal poles/scissor braces;
6. Connecting wall parts, laying scaffolding boards, tying protective railings and protective nets.
Second, the installation steps of the disc-type scaffolding
1. Adjustable base: After laying out the lines according to the size of the bracket configuration diagram, arrange the adjustable base to the fixed point.
2. Standard seat: Place the vertical rod sleeve of the standard seat upward above the adjustable seat, and the lower edge of the standard seat should be completely placed in the groove of the wrench force surface.
3. Layered horizontal rods: put the horizontal rod head into the round hole position, so that the front end of the horizontal rod head is close to the round tube of the vertical rod, and then use bolts to penetrate the hole and knock it fixed.
4. Vertical rods: insert the long end of the vertical rod into the sleeve of the standard base. Check the position of the inspection hole to see if the vertical rod is inserted into the bottom of the sleeve. Please note that the vertical rod is only used for the second-floor building, and the vertical rod is used from the second floor.
5. Layer diagonal tie rods: assemble all diagonal tie rods clockwise or counterclockwise. Put the diagonal tie rod into the large hole position of the valve disc, so that the front end of the diagonal tie rod head is against the round tube of the vertical rod, and then use bolts to knock the fixing bolts into the large hole. Note: The diagonal horizontal tie rod is directional and cannot be built in reverse.
Third, the unique advantages of the disc-type scaffolding
1. The disc-type scaffolding has fewer fasteners, which is convenient for installation and disassembly during operation and can be applied to the installation of various building structures.
2. The manufacture of connecting fasteners designed for high-strength steel has a very simple structure, very stable force, and safe and reliable performance. The internal bolts have a self-locking function, which can completely avoid unsafe factors during operation. The contact area between the fastener and the support column is large, which can improve the strength and bending resistance of the steel pipe.
3. The main materials of the spiral buckle scaffolding are international Q355 steel pipe and low-alloy steel pipe. The low-alloy scaffolding used has high strength, lightweight, strong corrosion resistance, good economic benefits, and high social benefits.
4. The main components of the disc buckle scaffolding generally adopt internal and external galvanizing anti-corrosion technology, which can improve the service life of the product, further increase safety assurance, and be beautiful.
Post time: Sep-13-2024