The detailed size of industrial scaffolding involves many aspects, mainly including the size specifications of main rods such as uprights, horizontal rods (crossbars), and diagonal rods. Friends who are not clear about this information can take a look at the introduction of detailed size information on industrial scaffolding:
First, uprights
Diameter: There are two main specifications of uprights for industrial scaffolding, namely 60mm and 48mm. The 60mm diameter uprights are mainly used for heavy supports such as bridge projects, while the 48mm diameter uprights are mainly used in housing construction and decoration, stage lighting stands, and other fields.
Length: The length specifications of the uprights are various, and the commonly used ones are 500mm, 1000mm, 1500mm, 2000mm, 2500mm, 3000mm, and 200mm, etc. In addition, there are also uprights with a maximum length of 3130mm.
The second, horizontal bar (crossbar)
Model specification modulus: The model specification modulus of the horizontal bar is 300mm, that is, the length of the horizontal bar can be a multiple of 300mm, such as 300mm, 600mm, 900mm, 1200mm, 1500mm, 1800mm, 2400mm, 3000mm, etc. It should be noted that the nominal length of the horizontal bar is the distance between the vertical bar axes, so the actual length is shorter than the nominal length by the diameter of a crossbar.
Common length: Depending on the nature of the project, the most commonly used horizontal bar lengths in the formwork support scaffolding are 1.5m, 1.2m, and 1.8m. For the operating frame, the length of the horizontal bar is generally 1.8m, and 1.5m, 2.4m, etc. are used in combination.
The third, diagonal bar
Specifications: The length and specifications of the diagonal bar are determined according to the length of the horizontal bar and the pitch (the spacing between the upper and lower horizontal bars). For example, the horizontal bar pitch of the formwork support frame is generally 1.5m, so the height of the vertical diagonal bar of the formwork support is generally 1.5m, such as the vertical diagonal bar used on the 900mm horizontal bar is 900mmX1500mm, and the vertical diagonal bar used on the 1200mm horizontal bar is 1200mmX1500mm, etc. However, in projects with particularly low bearing capacity such as operating frames or lighting frames, the pitch can be 2m, and the corresponding vertical diagonal bar height is 2m.
Fourth, other components
Disc: There are eight holes on the disk of the industrial scaffolding, four small holes are dedicated to the crossbar, and four large holes are dedicated to the diagonal bar.
Adjustable support: As part of the scaffolding, it is used to adjust the height to ensure the stability and adaptability of the scaffolding.
In summary, the detailed dimensions of the industrial scaffolding include the length and specifications of the main bars such as the vertical bars, horizontal bars (crossbars), and diagonal bars, as well as the specific dimensions of components such as the disc and adjustable support. These dimensions are designed to meet the needs of different projects and ensure the safety and stability of the scaffolding. In actual use, the selection and erection should be carried out according to specific engineering requirements and specifications.
Post time: Aug-08-2024