Menene tsarin da abubuwan da ke cikin kayan don diski-nau'in scaffolding?

Rediyon Discffolding ya ƙunshi wani sanda na tsaye, sanda a kwance, sanda na karkata, tushe mai daidaitawa, bangarori mai daidaitawa, ɗakunan ajiya da sauran abubuwan haɗin. Rod na tsaye yana ɗaukar hannayen riga ko haɗa shi da a kwance kuma ana amfani da ƙarar mai saurin haɗawa don samar da gungumen murfin karfe mai ƙarfi (ana kiransa da yanayin haɗin kai tsaye. Amfani da shi za'a iya raba shi iri biyu: Scapfolding da tsari na tsari.

Diski-rubuta scaffoldingabin da aka kafa
1. Disc buckle kumburi: Sashe inda ake haɗa diski akan tallafin an haɗa shi da fil a ƙarshen sandar sandar.
2. Dogaro: Rod na tsaye na tsaye na bayanan da aka diski-discle karfe bututun.
3. Consting farantin: octagonal ko faranti na orifis na welded zuwa geluped a cikin 8tions.
4. Daidaita Poleve: Supeve na Musamman na Musamman ga ƙarshen yanki don haɗin gwiwar.
5. Haɗin da aka haɗa: Pooke na musamman don gyara pole da gungumen katako don hana sutura ta hannu.
6. SOWN AY: Rod kwance na nau'in nau'in soket ɗin disk boney karfe.
7. Buše mai haɗi da filayen da aka tsara: ɓangare na musamman don gyara mai haɗawa da farantin mai haɗi.
8. Kulla ROD: ana iya buɗa shi da farantin mai haɗawa a tsaye don inganta kwanciyar hankali na tsarin tallafi. Akwai nau'ikan sanduna guda biyu na sanduna guda biyu
9. Daidaitacce tushe: Tasirin-daidaitacce a kasan gunkin.
10. Daidaitacce Barkon: Tsarin Tsayin Tsayinsa a saman katako

Abubuwan da ake buƙata na kayan don nau'in bayanan abubuwan da aka yarda da su
1. Pipe na karfe ya kamata ya kasance kyauta na fasa, dents, ko lalata, da butroves butt-welded karfe bututu;
2. Pipe na karfe ya kamata kai tsaye, da izini karkatar da madaidaiciya ya kamata ya zama 1/500 na tsawon bututu ne ba tare da buɗe buɗe ba ko kuma yana da ƙurji;
3. A farfajiya na sawun ya kamata ya zama santsi, kuma bai kamata a lalace kamar ramuka na yashi ba, zuba a cikin ramuka mai kwari ya kamata a tsabtace;
4. Kasa mai sa ido ba dole ba ne da lahani kamar Kullah, fasa, fata, da sauransu.;
5. The effective height of each weld should meet the requirements, the weld should be full, and the welding flux should be cleaned, and there should be no defects such as incomplete penetration, slag inclusion, meat biting, cracks, etc.;
6. Fita na daidaitaccen tushe da kuma daidaitacce bracket ya kamata a tsoma shi ko sanyi galvanized, kuma shafi yakamata ya zama uniform kuma mai ƙarfi; A farfajiya na firam da sauran abubuwan haɗin ya zama mai zafi-gizar da ke da zafi, farfajiya ya kamata ya zama mai santsi, kuma babu mai ƙonewa a gidajen abinci. , Zubar da ciwace-ciwacen sama da wuce haddi;
7. Tambarin mai ƙira a kan manyan abubuwan haɗin ya kamata a bayyane.


Lokaci: Nuwamba-08-2021

Muna amfani da kukis don bayar da kwarewar bincike, nazarin zirga-zirgar Site, da keɓancewa. Ta amfani da wannan rukunin yanar gizon, kun yarda da amfanin kukis ɗinmu.

Yarda