1. A lokacin jujjuyawar bututun ƙarfe mai ƙarfi scaffolding, ya kamata a biya hankali ga tushen mai tushe, kuma ya kamata a ɗauki ma'aunin magudanar ruwa don hana ruwa daga tushe.
2. Dangane da saitin haɗi na bango na bango, da girman nauyin, ana amfani da layin layi biyu scatholding sanduna ana amfani da su. Ditin kwance gabaɗaya 1.05 ~ 1.55m, matakin nisan scafpfolding ko masonry, kuma nisan da ke tsaye na katako shine 34 mita shine mita 34. ~ 50m. Lokacin da aka saita ta a jere guda, nisa na poles shine 1.4 ~ 1.4m, nisan nesa na poles shine 1.5 ~ 2.0m, da kuma mai ba da izini na awo shine 24m.
3. Ya kamata a saita sandar sandar sandar sanda a gefen ciki na sanda na tsaye, kuma tsayinsa bai kamata ya zama ƙasa da na uku ba. Rod na kwance na tsaye na iya amfani da butterseners ko gidajen cin abinci. Idan aka yi amfani da hanyar butter mafi sauri, ya kamata a shirya bututun masu zagaye a cikin yanayin da aka yi. Idan ana amfani da haɗin gwiwa, tsawon lap bai zama ƙasa da 1m ba, ya kamata a shirya masu jujjuya uku a daidai tsaka-tsaki don gyarawa.
4. Babban kumburi na sikelin (wato, m aya na a tsaye, a tsaye-kwance wanda yake kusa da junan ka) dole ne a sanya shi da fanko mai tsawo, kuma an haramta cire shi. Distance cibiyar-zuwa-tsakiya na kusurwa biyu na biyu na biyu a manyan kumburin kada ya fi 150mm. A cikin jere-jere slathanding, da tsayin tsawan filin da aka kwance a kan bango a kwance na marin sandar a tsaye, kuma bai kamata ya fi 500mm; Yana buƙatar saita shi da daidai ba daidai ba, kuma matsakaicin rarraba bai kamata ya fi 1/2 na sarari tsaye.
5. Scaffolding a kan aikin aiki ya kamata a rufe shi da fadada yaduwa, 120 ~ 150mm daga bango; Rarrubetarewa da dogon siket, kamar su siliki karfe scaffolding, katako scaffolding, da sauransu, ya kamata a saita akan sanduna uku a kwance. Lokacin da tsawon saitin scaffolding ba kasa da 2m, za a iya amfani da sanduna biyu a kwance biyu don tallafawa shi don hana shi da asarar kai. Ya kamata a ƙaddamar da allon shinge mai shinge mai shinge na manyan sandunan bamboo, da igiyoyin ƙarfe na tsaye, kuma za a gyara kusurwoyin ƙarfe masu tsayi tare da wayoyi masu kauri.
6. Dole ne a saita tushe ko farantin baya a ƙasan tushen tushen. Scaffolding dole ne a samar da a tsaye da kwance share fage. Ya kamata a gyara shinge na tsaye a kan gungumen a nesa ba fiye da 200mm daga cikin kusurwar 'yan sanda nan da nan a tsaye sefencewa pole tare da' yan sanda na tsaye tare da 'yan fashi da dama. Lokacin da kafuwar katako ba ta da tsayi ɗaya ba, mafi girman gogewar katako a cikin babban wuri dole ne a fice biyu da kuma gyarawa da getted tare da low wuri kuma gyarawa tare da sanda, kuma bambancin tsayi ya zama mafi girma daga lm. Distance daga gatari na katako na tsaye sama da gangara zuwa gangara ya kamata ƙasa da 500mm.
7. Matsayi nesa na kasan ƙasa na scaffold bai fi karfe 2m ba. Dole ne a haɗa sandunan dogaro da ginin tare da haɗawa da bangon bango. Ban da saman mataki na saman Layer, gidajen abinci na sauran yadudduka dole ne a haɗa ta butters fasteners. Idan hanyar ButT ɗin ButT ana karɓa ta, za a shirya masu taimako na Butters a cikin yanayin da suka dace. Lokacin da hanyar lap ta karba, tsawon lap hadin gwiwa ba zai zama ƙasa da 1m kuma za a gyara ta kowane ƙasa da murfin murfin ba zai zama ƙasa da l00m.
8. An sake saita tsarin haɗi na bango kusa da manyan kumburin, da nisan nisan kumburi bai fi 300mm. Ya kamata a saita shi daga sandar kwance ta farko a ƙasa. Dole ne a shigar da ƙarshen layi biyu da buɗe nau'in sikelin tare da haɗa sassan bango, bayanan da ke tsaye na irin wannan selffolding da sassan bangon kada su fi tsayi girma daga ginin, kuma bai kamata ya fi 4m (Matakai 2) ba. Don jere-layi biyu tare da tsayin fiye da 24m, ƙwayoyin jikin dole ne a yi amfani da su don dogara da ginin.
9. Ya kamata a samar da jere-jere-jere tare da scissor braces da kuma transverse diagonal braces, da kuma ya kamata a samar da jere-jere tare da silissor braces. Yawan scissors strisss spaning da poles bai wuce 7 lokacin da karkatar da karkace tsakanin almakashi strisss kuma ƙasa ita ce 45 °; Lokacin da kusurwa tsakanin almakashi da strisss strisss kuma ƙasa ce 50 °, bai kamata ya wuce 6 ba; When the inclination angle of the struts to the ground is 60°, there should not be more than 5. The width of each scissor brace should not be less than 4 spans, and should not be less than 6m, the inclination angle between the inclined rod and the ground should be between 45°~60°; Guda biyu da biyu na jere tare da tsayinsa na ƙasa da 24M dole ne ya kasance a saman factuade. Za a saita taɓo na tagulla a kowane ƙarshen ginin, kuma za a ci gaba da shirya daga ƙasa zuwa saman; A bayyane ta nesa tsakanin kowane nau'in takalmin takalmin da ke tsakiya ba zai wuce 15m ba; Za a zana jere na biyu tare da na 24m na sama da 24m za'a sanya a kan tsawon da tsayi na waje na waje. Za'a shirya takalmin takalmin takalmin katakon takalmin ƙarfe na ci gaba da ci gaba a saman sashin na sama; Za a shirya takalmin gyaran launin fata a cikin sashin guda kuma an shirya ci gaba a cikin tsarin zigzag daga ƙasa zuwa saman saman, kuma gyaran gyaran gyarawa za su cika ka'idodin da suka dace; A kwance diagonal mai narkar da ya kamata a saita kowane siyarwa 6 a tsakiya.
Lokaci: Aug-03-2022