Abubuwa 10 na yin amfani da scaffold a

1. Gidauniyar

1) Ko an ƙididdige aikin Gidauniyar Scapfold da Gidauniyar Tsayince da ingancin ƙasa na hanyar lalata da ƙa'idodi.

2) Ko harsashin tushe da harsaffofin scaffold suna da compated.

3) Ko kafuwar scaffold da tushe matakin ne.

4) Ko akwai ruwa a cikin tushe da harsadan scaffold.

2. Lambatu

1) an saita slassfolding don cire tarkace daga shafin, matakin shi, da kuma sanya magudanar ruwa.

2) nesa na kafaffun dutsen ya zama mafi girma fiye da 500mm daga bunƙasa na fure na sikelin.

3) nisa na magudanar magudanar ruwa shine tsakanin 200m ~ 350mm, kuma zurfin shine tsakanin 150m ~ 300m.

4) tarin da kyau (600mm)×600mm×Ya kamata a saita 12 na tsafin don tabbatar da cewa an cire ruwa a cikin tsakar rana.

3. Tallafi na baya da tallafi

1) Yarda da kwamitin scaffolding da tallafi na kasa an ƙaddara gwargwadon ƙarfin da kuma nauyin kaya na scapfold.

2) ƙayyadadden kwamitin tallafi na scaffold a ƙasa 24m (aya girma ƙasa da 20mm, kauri mafi girma daga 50mm, tsayinsa ya zama kasa da 50 na​​Ginin baya ba zai zama ƙasa da murabba'in murabba'in 0.15 ba.

3) Kaurin kauri daga cikin murfin filayen scaffold sama da 24m dole ne a iya ƙididdige.

4) Dole ne a sanya wata tallafin scapfolding a tsakiyar allon tallafi.

5) Faɗin tushe na sikelin ba zai zama ƙasa da 100mm ba kuma kauri ba zai zama ƙasa da 5mm ba.

4. Pole

1) Dole ne a haɗa shinge na katako, kuma dole ne a haɗa shi tsakanin katako mai laushi da katako.

2) matakin bambance-bambancen yanki na share fage ba zai fi 1m, da nisa daga gefen gangara ba zai zama ƙasa da 0.5m.

3) Za a gyara pole na tsaye a kan gunaguni ba fiye da 200mm nesa daga Epithelium na tushe tare da masu fafutuka na dama.

4) Tsarin kwance a sarari a tsaye a tsaye a tsaye kai tsaye a ƙasa seadde pole tare da 'yan kusunta.

5. Batun

1) Babban kwarewar scaffold an lasafta bisa ga bukatun gine-gine. Misali, nisa tsakanin sandunan a tsaye na scaffolding na yau da kullun dole ne kasa da 2m, nisa tsakanin sandunan da ke kwance a tsaye dole ne ya zama ƙasa da 2m sanduna. Abubuwan da aka bincika ta ginin da ginin ya bincika kuma ana karɓa da bukatun lissafi.

2) An aiwatar da karkatarwa na kwaroron da aka tsara a gwargwadon bayanan a cikin Tebur 8.2.4 a cikin Fasaha na Fasaha Ga Ginin Fastery Karfe Scapfolding JGJ130-2011.

3) Lokacin da aka tsawaita furen launi, sai dai a saman saman Layer, za a iya amfani da gidajen haɗin gwiwa. Hanyoyin gidajen da sauran yadudduka dole suyi amfani da butterseners don haɗa jikin cututtukan fata. Ya kamata a shirya gidajen abinci na jiki a cikin yanayin da aka yi da kyan gani: kayan haɗin gwal na kusa kada a saita su cikin synchronous ko a cikin wannan span; A kwance mai tawakkali tsakanin gidajen abinci biyu na asynchronous ko Spans daban-daban kada ya zama ƙasa da 500mm; Nisa daga tsakiyar kowane ɗayan haɗin gwiwa zuwa babban madaidaiciyar kumburi kada ya fi 1/3 na ƙarshen nesa; Tsawon overlap bai zama ƙasa da 1m ba, ya kamata a shigar da gani na 1m, 3 ya kamata a shigar da gani mai kyau a daidai lokacin da sandar murfin da aka yi wa andaƙarar ruwa mai tsayi da aka kwance ba ta da ƙasa. A cikin katako mai narkewa, tsayin katako ba zai zama ƙasa da matakai 3 ba, kuma tsawon bututun ƙarfe ba zai zama ƙasa da 6m.

4) An saita ƙananan ƙananan ƙwayar sikelin a cikin tsararren madaidaiciya da babban giciye kuma dole ne a haɗa shi da sanda a tsaye ta amfani da fasters na dama. A lokacin da a cikin aikin Layer, karamin mosai ya kamata a ƙara tsakanin nodes biyu ya dauki tare da saurin kusurwa, an gyara kananan sanda a kwance.

5) Dole ne a yi amfani da wuraren shakatawa a lokacin da aka soke daga firam. Babu musayar ko amfani da 'yan bindiga. Kada a yi amfani da fuskoki tare da fasa fasa a cikin firam.


Lokacin Post: Oktoba-13-2020

Muna amfani da kukis don bayar da kwarewar bincike, nazarin zirga-zirgar Site, da keɓancewa. Ta amfani da wannan rukunin yanar gizon, kun yarda da amfanin kukis ɗinmu.

Yarda